PNG → DXF · R2000 + R12

PNG to DXF Converter — Cut-Ready Output

Drop a PNG, get a DXF that actually cuts — closed paths, color-separated layers, units embedded. Processed on your device, never uploaded.

Drop a PNG here — or browse
— or —
ACCEPTS: .PNG · PROCESSED LOCALLY
R12 compatibility mode available
Flat-color graphics → cut-ready · Photos → stylized result
🔒 Files stay on your deviceNo accountNo watermark10 free conversions a day
Proof — in our tests

"R2000 output carries units, so your file opens at the size you drew it. R12 compatibility mode covers older CAM. Every path closed, every layer color-separated — in our tests, a compressed logo that default tracing renders in 88 layers comes out in the teens or better."

Compressed logo PNG input (synthetic sample) Color-separated clean output (synthetic sample)
⇔
BEFOREAFTER
The problem

A PNG is a picture. Your cutter needs paths.

  • "Your plotter, laser cutting machine or CNC can't read pixels — it follows paths. A raw auto-trace gives you thousands of loose segments."
  • "Free converters stop at 'here's a vector.' Whether it cuts is your problem."
  • "And most of them want your file on their server first."

Looking for photo to DXF or picture to DXF? Same tool, same rule: flat-color graphics are designed for cut-ready output — photos come out stylized.

The pipeline

From PNG to cut-ready DXF, in your browser

  1. Clean the image first

    Denoise and upscale before a single path is traced.

  2. Trace with parameters tuned to your image

    Not one-size-fits-all defaults.

  3. Export real DXF

    R2000 with units by default, R12 compatibility mode for older CAM, SVG if your machine prefers it.

iNot sure? Keep R2000 — it carries units and opens correctly in LightBurn, AutoCAD and modern CAM. Choose R12 only when your software is older than the format.
Workflow

How to convert PNG to DXF (and get a file that cuts)

  1. Drop your PNG.

  2. Check the layer preview; slide precision if you want a smaller or smoother file.

  3. Download DXF (R2000 or R12) — done.

No sign-up. No watermark. Your PNG never left your machine.

Honest comparison

Why not just use a free tracer?

Free online tracers — including the open-source PixelToPath — stop at SVG. CleanPaths goes the last mile: real DXF export in two versions (R2000 with units, R12 compatibility mode), closed paths, color-separated layers, and a preprocessing pipeline that cleans bad images before tracing. Free tools give you a vector. We give you a cut file.

Free online tracers (e.g. PixelToPath online)CleanPaths
DXF export❌ SVG only✅ R2000 + R12
Units in file❌✅ (R2000)
Bad-image preprocessing❌✅ denoise + upscale + auto-tuned
Closed, color-separated pathsLimited (default settings)✅
Files stay on your device✅✅

Holding a .jfif instead of a PNG? Our free JFIF to JPG tool fixes the extension first — then trace as usual.

Free for 10 conversions a day — every feature above included. Heavy day? Pro lifts the cap: $59, one time.

Get CleanPaths Pro — $59, one time
FAQ
What DXF version do I get — R12 or R2000?
Both, your choice. R2000 is the default and embeds units (mm/inch) so files open at the right size. R12 compatibility mode is there for older CAM software that only accepts the 1992-era format.
How does CleanPaths compare to PixelToPath?
PixelToPath is a genuinely good free tracer — MIT-licensed open source, free with no usage cap — but its online version stops at SVG. CleanPaths goes the last mile: real DXF export in two versions (R2000 with units, R12 compatibility mode), closed color-separated paths, and a preprocessing pipeline that cleans noisy images before tracing. If you only need an SVG for the web, PixelToPath is a solid free choice. If the file has to cut, that's what CleanPaths is built for.
Will the DXF work in LightBurn?
Yes — output is all POLYLINE with zero SPLINE entities, which is exactly what LightBurn handles best. Always run a test cut before production.
Does the conversion keep my logo's colors as separate layers?
Yes — output is color-separated so you can assign different cut settings per layer. In our tests a typical flat-color logo lands in the single-digit to teens layer range, not the dozens a default trace produces.
My PNG is small and blurry — can it still work?
Usually, if it's a flat-color graphic. The preprocessing pipeline upscales and denoises before tracing, which is exactly the case it's built for. There's a limit — a 50px smudge has no detail to recover — but try it: it's free and the preview shows you the result before you download.
Can I convert a photo to DXF?
You can, but expect a stylized, posterized result — not cut-ready. This page's promise covers flat-color graphics: logos, icons, line art. And whether you call it photo to DXF or picture to DXF, the rule doesn't change: flat-color graphics are designed for cut-ready output; photographic scenes come out stylized.
Do you upload or store my PNG?
No. Conversion runs entirely in your browser — there is no upload step. We never receive, see, or store your images or the files you generate. Close the tab and they're gone; we never had them. This is how the tool is built, not a marketing claim. Details in our Privacy Policy.
Is there a daily limit?
Free tier: 10 conversions a day, full quality. Pro removes the cap — $59, one time, no subscriptions.
Why does my DXF have so many nodes?
Convert the image here and check the layer preview — the preprocessing pipeline denoises before tracing, and sliding Precision down trades a little smoothness for far fewer segments. Bloated node counts usually come from the input, not the DXF format: JPEG noise and fuzzy edges get traced as hundreds of tiny path points. Cleaning the image first removes most of those false edges at the source.
Why does my DXF open at the wrong size?
Export with the default R2000 version — it embeds units (mm/inch) in the file, so LightBurn, AutoCAD and modern CAM open the design at the size you drew it. Wrong sizes almost always trace back to R12 files: the 1992-era format has no unit field, so the importing software guesses. If you must use R12 for older CAM, set the unit manually at import.
How do I open a DXF file in LightBurn?
In LightBurn, use File → Import (or drag the .dxf straight onto the workspace). Choose this page's default R2000 export — it embeds units, so the design lands at real size. CleanPaths output is all POLYLINE with zero SPLINE entities, which is exactly what LightBurn handles best.
Why is my DXF the wrong scale in LightBurn?
Re-export with R2000 — it carries units in the file, so LightBurn reads the real dimensions directly. Scale errors in LightBurn usually mean the file was R12: that format stores no units, so the import falls back on a unit assumption, and a wrong guess scales the whole design. If you have to stay on R12, match LightBurn's import unit to the unit you designed in.
Why won't my DXF file open in LightBurn?
First check where the file came from. If another converter made it, the usual culprit is SPLINE entities — smooth-curve objects that strict CAM software can't parse; re-make the file here and that whole problem class disappears, because CleanPaths writes all-POLYLINE output with zero SPLINE entities. If a CleanPaths file itself won't open, try the other DXF version (R12 compatibility mode instead of R2000, or vice versa). And if it still fails, that's a bug — tell us via the feedback form.

That logo PNG sitting in your inbox? Convert it before the tab gets cold.

Convert PNG free now
FEEDBACK